Each case lists the documents involved, what the agent does with them, the output you get back and how it is metered. Cases describe designed behaviour; the product is in early access.
Requirement: body material ASTM A216 WCB. The datasheet lists exactly that for the offered model.
Requirement: all documents in buyer's numbering per Annex C and native CAD formats.
Requirement: hydrostatic test per API 598 with witness. Evidence is in the inspection and test plan, not product literature.
Requirement: low-emission packing to ISO 15848-1 class B. The company holds a class C certificate only.
Requirement: 150 bar at 120 °C. The datasheet rates 150 bar at 100 °C and 140 bar at 120 °C.
Ambiguous requirements (edition unspecified, conflicting values between spec and data sheet) need buyer clarification within the Q&A window.
The buyer's instructions require deviations in a specific table: clause, requirement, deviation, justification, alternative, cost impact.
Twelve items are Needs engineer. The engineers have one day.
The buyer wants a narrative technical response, not just a matrix. The company has three past responses with a house style.
Buyer issues Addendum 2 revising the design temperature and adding a coating spec, three days before submission.
The ITT splits requirements across a general spec, a mechanical spec, a materials spec, an inspection spec, a documentation spec and the dat…
The specification's narrative paragraphs contain 'shall' statements that are not numbered and would be missed by a clause-by-clause pass.
The spec cites API 6D without an edition; the data sheet cites the 25th edition; the company's certificate is to the 24th.
The ISO 9001 certificate cited in the matrix expires two weeks after submission.
DS-V300 has revisions 3, 4 and 5 with different P/T tables. The matrix must cite the revision being offered.
A past response claimed compliance with a requirement the current datasheet does not support. Reusing it would repeat the error.
A framework tender sets technical requirements for five years of call-offs; each call-off will cite the framework matrix.
Sales receives a 300-page ITT and needs to know by tomorrow whether the product range can comply enough to bid.
The ITT has three lots (gate, globe, check valves) with a shared general spec and lot-specific data sheets.
Requirement: 3.2 certificates for pressure-retaining parts. Standard practice is 3.1.
Requirement: CE marking under PED, category IV, module H. The company holds module B+D.
Requirement: trim materials suitable for sour service per NACE MR0175.
After submission the buyer sends 23 technical clarification questions referencing the matrix.
The bid was lost on technical scoring. Sales wants to know which requirements scored low.
We are onboarding a small number of design partners with real documents and real deadlines. Tell us what you work on and we will set up a workspace with your material.